Painting Home on Your Own? Helpful Tips for Using a Paint Sprayer for Flawless Job!

Are you painting your Home or Room on Your Own? Don't you love having your personal touch on everything you do? Do you remember, Asian Paints advert- 'Mera Wala Blue' in 2013? If you ask these questions to people, most millennials understandably would like to jump right into the project and paint their home on their own. It is an emotional reaction. Why? Mainly because they're excited to see their new colour on their walls. After all, painting walls is the easiest way to transform a space. Most of us think that painting a room is an easy, painless, relatively inexpensive task. But this is not the case. If you are not a professional painter, things might go wrong, and you end up painting walls again. I am not discussing the conventional painting that has been done by brush or rollers, whereas this post will discuss the tips of using a paint sprayer for painting like a pro. Unlike brush strokes, using a paint sprayer gun is quite simple, leaves a smooth and flawless finish on surfaces, considering you follow the given below tips-

Consider mother nature

Plan your painting task. Know your local weather patterns. Believe it or not, high humidity in the air role in spray painting discharges some droplets before reaching the intended surface. You might notice the effect of moisture, but it hampers your entire project's overall finish and efficiency.

Pick right painting gun

Commonly, there are four types of sprayers with different nozzles and air pressures in the market. Get acquainted with your paint gun before starting any project! LVLP paint sprayers are used for smaller jobs and can not handle thick paint. HVLP spray guns, which are easy to control and suitable for thinner colours, come with hot air that quickly dries the colour. Electric paint spray guns are the fastest spray-painting solution for volume work. It needs little preparation, and you can use it almost straight away. Airless paint sprayers pump paint through a hose and out of a small hole. It can be used to print smooth or textured walls, concrete, and wood.

Clean surface before painting

Do you want an excellent finish that reflects light? If yes, before you begin, clean and smooth the surfaces. Skipping cleanup is a bad idea! You can use sandpaper to remove trouble spots and remove grease. Making sure there is no airborne debris could ruin my paint job. You can use a sponge bath to clean textured walls. Paint does not stick to rotten wood and siding material, so you must first fix it before painting it.

Check your work

Between coats, it is better to check your work. Ask your friend's or neighbour's opinion. Sand off any bumps before applying the next coat but don't overcoat. Overspray is one of the common problems with spray paint. Use adhesive tape to cover up the place you don't want to paint.

Cleaning spray painter after the job

Follow the instructions in the manual you got with a spray gun to maintain and clean it properly. Clean spray painter with the proper fluid and ringe the air distribution mechanism of the gun. Please don't use a metal wire gun for cleaning; it may break something in the process. Disassemble the paint sprayer, paint needle and cap and unscrew the fluid tip. Use a blow dryer and keep the sprayer safely!

Other precautions

Don't smoke where you're using a paint sprayer. Turn off stoves or electric tools and appliances. Always wear a mask while using a sprayer, else you might be breathing in a lot of paint fumes that are not good for your health. Do not spray paint over an electrical outlet or wiring. Use gloves, and wash your hands after finishing a painting job.

Wrapping up

After reading this, you might be knowing the essential tips to get started on your first paint job! Hope you enjoyed reading and all the best for your painting job!